YZF-R15

Yamaha YZF-R15 for Sale at MOTOGO Yamaha in Bentleigh, VIC | Specifications and Review Information
The entry-level R15 is all-new for 2020 and now comes with a bigger 155 cc, liquid-cooled engine that runs a higher compression ratio for increased power. Plus new Variable Valve Actuation for improved low end torque as well as top end grunt. The new chassis is sharper steering and the new bike runs a slipper clutch for smoother gear changes under hard downshifts.
R15 still sips the fuel at a miserly rate but now punches even harder above its light weight.
Racing Blue
Thunder Grey

AERODYNAMIC BODYWORK
The racing-inspired bodywork is now more aerodynamic, featuring a central air intake and layered fairings. An indentation in the top of the fuel tank optimises the rider's tuck position. Fuel capacity has been reduced by 1-litre to 11-litres for a more streamlined design.

SINGLE-CYCLINDER 155CC ENGINE
The engine also features a lightweight forged aluminium piston with DiASil coated cylinder wall, larger diameter intake and exhaust ports, upgraded fuelling, a 5.5-litre air cleaner that's 60 percent larger than the outgoing engine, an assist and slipper clutch and a new muffler with a three-stage expansion chamber. In addition to the extra power produced, the new engine is also more economical on fuel, delivering in excess of 450km from a single tank, that's an incredible 45km per litre.

RACE-INSPIRED STYLING
Slim twin-eye LED headlights have an aggressive glaring eyes look similar to the YZF-R1, while the cockpit features a YZR-M1-inspired triple clamp and multi-function LCD instrument panel.

DELTABOX FRAME
A 20mm increase in width between the left and right pivot points on the updated Deltabox frame, now 221mm, has allowed the fitment of a new delta-shaped swingarm. Reinforcement of the swingarm is by internal ribbing, to accommodate a wider 140/70-17 rear tyre on the wider rear wheel.

LARGER BRAKES
Braking performance has been increased with a new 15mm larger 282mm front brake disc and twin-piston caliper. At the rear is a 220mm disc with a single-piston caliper.

VARIABLE VALVE ACTUATION
The cylinder head features two inlet cams: one for low to mid-range rpm and another for high rpm. The switch between the two rocker arms is carried out by a solenoid motor activated at a predetermined rev-range. The result is high revving performance without sacrificing low-to-mid-range torque and rideability. The technology delivers an 18.3 percent increase in power from just a three percent (5cc) increase in engine capacity.
Technical Specifications
Engine
Engine Type | Liquid-cooled, 4-stroke, SOHC, 4-valve |
---|---|
Displacement (cc) | 155.0 |
Bore x Stroke (mm) | 58.0 x 58.7 |
Compression Ratio | 11.6 : 1 |
Lubrication System | Wet Sump |
Fuel Management | Fuel Injection |
Ignition | TCI |
Starter System | Electric |
Fuel Tank Capacity (L) | 11.0 |
Final Transmission | Chain |
Transmission | Constant mesh 6-speed |
Chassis
Frame Type | Deltabox |
---|---|
Suspension Front | Telescopic forks, 130 mm travel |
Suspension Rear | Swingarm (link suspension), 97 mm travel |
Brakes Front | Hydraulic single disc, 282 mm |
Brakes Rear | Hydraulic single disc, 220 mm |
Tyres Front | 100/80-17M/C 52P Tubeless |
Tyres Rear | 140/70-17M/C 66H Tubeless |
Dimensions
Length (mm) | 1990 |
---|---|
Width (mm) | 725 |
Height (mm) | 1135 |
Seat Height (mm) | 815 |
Wheelbase (mm) | 1325 |
Ground Clearance (mm) | 170 |
Wet Weight (kg) | 138 |